#More information#
Pull strength with an air gap of 0mm
Product diameter
|
20 |
25 |
30 |
40 |
50 |
| Magnetic pull (kg) |
5.3 |
15.0 |
28.0 |
55.0 |
100.0 |
Pull strength with an air gap of 0mm
Product diameter
|
65 |
80 |
100 |
Magnetic pull (kg)
|
167.7 |
200.0 |
360.0 |
Pull force conversion (approximate):- 1kg =10N = 2.2lb.
Outer shell is a sturdy bright nickel plated cylinder, passivated with body mounting. Designed for surviving demanding clamping applications.
The Energise to Hold Electromagnet is a standard electromagnet concept – a solenoid (wound copper coil) within a high quality high permeability iron assembly for high clamping forces and low magnetic losses.
The iron cylinder of the energise to hold electromagnet is of sturdy design with a bright nickel finish passivated with body mounting.
Armature plates (keeper plates) exist to suit each energise to hold electromagnet unit. The energise to hold electromagnet has one central and three equi-spaced (on a PCD) tapped holes on the rear face.
Depending on the size, the energise to hold electromagnet has three styles of electrical connection:- free leads, two-pole connector and Hirschman connectors.
The energise to hold electromagnet has,depending on the size, three supply voltages:- 12V dc, 24V dc and 240V ac.
The energise to hold electromagnet has an ED rating of 100%. The energise to hold electromagnet has an IP rating of 54(20 for the two-pole connector version). The energise to hold electromagnet shave maximum possible pull force ratings from 53N up to 3600N (5.3kg to 360kg /11.6lbs to 792lbs) depending on the size of unit (the actual pull achieved will depend on the application).
High-quality permeable iron for low remanence
Operating voltage 12VDC, 24VDC & 240VAC (Hirschman connector with rectifier)
Connector options* Free leads, two-pole connector or Hirshman connector with rectifier
Mountings Threaded hole/s in rear face of magnet
Finish Bright nickel plated with machined face
